BayCo Roofing

BayCo Roofing, Huntsville & Madison, AL

Metal Roofing

Metal roofing in Huntsville and Madison, AL is installed as a permanent solution. Snap-lock standing seam panels and specialty metal profiles last 40–70 years with zero maintenance. It costs more upfront than asphalt shingles, but most homeowners who choose metal are installing their last roof.

Who metal roofing is right for

Metal isn't the right call for every homeowner, but when it is, there's nothing better. It makes the most sense if you:

  • Plan to stay in your home long-term and want your last roof
  • Want zero maintenance: no granule loss, no curling, no cracking
  • Live in a hail-prone area and want Class 4 impact resistance
  • Care about energy efficiency (metal reflects heat, reducing cooling costs)
  • Have had multiple shingle repairs and are done with the cycle
  • Want a roof that adds resale value and stands out in the neighborhood

By the numbers

  • 40–70 year lifespan: metal roofing significantly outlasts asphalt shingles, which average 20–25 years in North Alabama's climate. (Metal Roofing Alliance)
  • Class 4 impact resistance: the highest rating available, tested to withstand 2-inch steel ball impact without cracking. (UL 2218 / FM 4473)
  • 10–25% cooling cost reduction: metal reflects radiant heat rather than absorbing it, reducing attic temperatures and air conditioning load in Alabama summers. (Oak Ridge National Laboratory)

Metal roofing options

“Most homeowners come to us asking about metal after they've already replaced their shingle roof once or twice. At that point the math is obvious. Metal costs more upfront, but you're done. No more budgeting for a new roof every 20 years.”

Jarrett Bailey, Owner, BayCo Roofing

How BayCo installs metal roofing

01

Satellite measurement & estimate

We measure your roof remotely and send a written, itemized estimate, usually within 2 hours. No appointment needed before you decide.

02

Full tear-off

We remove all existing material down to the deck. Metal is never installed over old shingles.

03

Deck inspection & repair

We inspect every board before laying underlayment. If anything needs repair, we document it and notify you before we proceed.

04

Metal panel installation

Underlayment first, then panels installed panel-by-panel with concealed fasteners. All ridge, hip, and valley flashing is finished by hand.

05

Cleanup & final walkthrough

We clean the job site completely and walk through the finished roof with you before we leave.

Common questions

How much does metal roofing cost in Huntsville, AL?

BayCo's snap-lock standing seam starts at $840/sq. For a typical Huntsville home, total costs generally run $12,600–$21,000. Specialty metal panels are custom-priced. Financing is available through Enhancify. Most homeowners can check rates in under 60 seconds.

Is metal roofing loud when it rains?

No. This is one of the most common misconceptions. Metal is installed over solid decking with underlayment, which absorbs sound. A properly installed metal roof is no louder indoors than a shingle roof.

How long does metal roofing last?

40–70 years, depending on the profile and environment. Metal does not granulate, curl, or crack. Most homeowners who choose metal are installing their last roof.

Do you tear off my existing shingles first?

Yes, always. Installing metal over existing shingles traps moisture, adds structural load, and prevents proper deck inspection. Every BayCo metal installation starts with a clean, inspected deck.

Related reading

Free, no commitment

Book a free inspection

We'll walk your roof, document the condition with photos, and give you an honest assessment.

2-hour turnaround

Get a digital quote

See real pricing for your home. No appointment, no sales call required.

Want to compare metal vs. shingles first? Read the homeowner's guide

Serving Huntsville · Madison · Athens · Cullman

Call Now